Export Office: 21Floor, No.5 Nanhai Zhi Road,Qingdao, Shandong ,China
Work Shop: Beian Industrial zone, Qingdao,Shandong,China
+86 532 88256399
Martin Li
Inquiry now
Ductile Iron Flange Strainers feature cast iron body with stainless steel mesh insert (perforated sheet) with the aperture size of 1.25-1.5 mm. The whole is equipped with a drain plug in the lower part, which allows easy disassembly during the removal of contamination.
Ductile Iron Y Strainer Flange End
Ductile Iron Y Strainer Flange End feature ductile iron body with stainless steel mesh insert (perforated sheet) with the aperture size of 1.25-1.5 mm.
The whole is equipped with a drain plug in the lower part, which allows easy disassembly during the removal of contamination in the pipeline.
The position of the filter allows capturing contamination during unrestricted flow of the medium.
The strainer insert chamber is fitted with a cast iron cover sealed with a rubber sealing O-ring or graphite on a steel ring and bolted to the body using hex.
Body | Ductile Iron |
Cover | Ductile Iron |
Mesh insert | Stainless steel PN-EN 10088-1:2014 |
Seal | Graphite CrNiSt |
Screw | PN-EN ISO 4016:2011 |
Drain plug | Malleable Ductile Iron |
Application:
Operating temp. up +120°C, 70°C for EPDM.
Cast iron flange strainer is for drinking and technological water systems.
It is recommended to install the strainer horizontally at the lowest point of the pipeline or at bending points.
In order to ensure full operational functionality, it is recommended to rinse the strainers with clean water periodically (twice per year) or more frequently, depending on the medium contamination level.
Export Office: 21Floor, No.5 Nanhai Zhi Road,Qingdao, Shandong ,China
Work Shop: Beian Industrial zone, Qingdao,Shandong,China
+86 532 88256399
Martin Li
© 2020 Qingdao Fluido Industrial Co.,Ltd. All Rights Reserved.