Export Office: 21Floor, No.5 Nanhai Zhi Road,Qingdao, Shandong ,China
Work Shop: Beian Industrial zone, Qingdao,Shandong,China
+86 532 88550859
Joe
Brass and stainless steel pipe fittings act as key parts in fluid control systems, plumbing, industrial piping, and valve assemblies. These materials fit many uses where trust, flow ease, and weather hold count.
Steel fittings lead in lots of world jobs because of their solid build. Brass fittings keep a firm spot in some cases. The pick between brass and stainless steel usually hinges on things like work states, money limits, and work needs.
Brass forms an alloy mostly from copper and zinc. It may add small bits of lead or other items to boost cut ease. This mix gives good shape ease and work ease. So, it allows exact form for hard fitting plans. Brass shows a clear yellow-gold look. This helps its use in seen setups where looks matter.
Fields like brass for its built-in germ-kill traits and fight against dirt build in water setups.
Usual uses cover plumbing parts, show gear, and low-to-mid pressure valve parts.
Stainless steel stands as an iron-based alloy. It adds chromium (at least 10.5%). It often includes nickel, molybdenum, and other items for better traits. Chromium builds a still oxide coat on the face. This gives top shield against burn and rust. Types like 304 and 316 give different fight levels. And 316 does better in salt-heavy spots.
Stainless steel keeps power over wide heat ranges. It fights pits in tough states. This stuff sees wide use in clean uses, high-push systems, and out or sea shows.
Stainless steel shows great tough build. Its hard feel fights shape change under machine push or hit.
Brass gives solid lasting in less hard uses. More zinc raises hard feel. But it may cut bend ease.
Brass moves heat well (about 109 W/m·K). And it flows power good. This helps heat swap fittings or power ground parts.
Stainless steel shows lower heat flow (around 16 W/m·K). And weak power flow.
This trait makes stainless steel better where heat keep or shield counts more than spread.
Rust fight acts as a main split point.
Stainless steel shines in rough states. It fights acids, salts, and sea air—above all 316 type with molybdenum. The still chromium oxide coat fixes itself when hurt.
Brass gives firm fight in fresh water, air show, and many chems.It works best against sea water in some mixes. But it risks zinc loss in sharp waters.
Melt points touch make and high-heat use.
Brass melts near 900-940°C (1652-1724°F). This depends on mix.
Stainless steel has a higher melt range. It runs 1375-1530°C (2507-2786°F).
Brass fittings often hold lower start prices. This comes from easy cut and lower base stuff costs.
Stainless steel asks higher start put. But it often gives better long-run worth through less care and swap needs.
Brass fittings fit show and work roles in plumbing systems.
Machine parts like taps, valves, and links gain from its cut ease.
Low-rub uses, like bearings or locks, use its rub traits.
Stainless steel fittings back hard fields.
Car, air, and move systems count on its power.
Med tools and food work need clean faces.
Chem work and sea spots use rust fight.
High-push plumbing and work valves use its lasting.
Business seeking reliable brass or stainless steel valves, pipe fittings, and related components benefit from partnering with an established factory.
FLUIDO specializes in high-quality brass fittings and stainless steel fittings. With over 25 years of experience, ISO-controlled production, and exports to more than 35 countries, FLUIDO delivers cost-effective, certified products for industrial, plumbing, and fluid control needs.
Contact the FLUIDO team today for quotes, custom specifications, or bulk supply requirements.
