Double Flanged Eccentric Taper

Ductile Iron Pipe Fitting For DI Pipe

Types: Dismantling Joint, Universal Flange Adaptor, Universal Coupling, Ductile Iron Loose Flange Joint, DI Pipe Fitting, Saddle for PVC Pipe, Repair Clamp, Qucick Flange Adaptor, Gibault Joint, Restrained Flange Adaptor, Restrained Coupling, Valve, etc.    

Material: MATERIAL: Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 for ductile iron fitting body and retainer, EPDM/NBR for ring, steel zinced/dacro for stub.   


Introduction


Specification: DN50-DN2000(2"-80"), available with PN10, PN16, PN25 and PN40 flanges    

Ductile Iron Flange Fittings Standard: ISO2531, ISO4179, ISO8179, BS EN 545, BS EN598, BS4772, ISO7005-2, EN1092-2:1997, DIN2501, GBT13295    

Flange: PN10, PN16 or PN25 drilling in accordance with ISO 7005-2/EN 1092-2.    

Fluid Temperature: 0°C-50°C, excluding frost.    

Pipe ends: Spigot, socket or flanges.    

Internal coating: Cement mortar lining comply with ISO4179 or bitumen painting (Ave. min.70 micron) or Fusion Bonded Epoxy Coating    

External coating: Sprayed metallic zinc coating (min.150g/m²) according to ISO8179 + bitumen painting (min.70 micron) or epoxy powder coating or epoxy painting or according to customer’s requirements.    

Types: Dismantling Joint, Universal Flange Adaptor, Universal Coupling, Ductile Iron Loose Flange Joint, DI Pipe Fitting, Saddle for PVC Pipe, Repair Clamp, Qucick Flange Adaptor, Gibault Joint, Restrained Flange Adaptor, Restrained Coupling, Valve, etc.    

Material: MATERIAL: Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 for ductile iron fitting body and retainer, EPDM/NBR for ring, steel zinced/dacro for stub.    

Application: Municipal Use, Waterworks Pipelines, Piping Fittings, Water Engineering, Potable Water Use, Irrigation Use, Water Supply Project Use, Water Treatment Plants Use, Pumping Stations, Water Utility Sectors, Water-Supply Pressure Pipeline, Potable Water Pumping Station, Stormwater Lines, Fire Water Pumping Station, Fresh Water Pumping Station, ect.    

Test: In accordance with ISO 2531 / EN 545 / EN598 and 100% water pressure test.    


Dimensions of Double Flanged Eccentric Taper    

DNdnLMass (kg)standard
PN10PN16
80502007.37.3ISO2531/EN545
80652007.97.9ISO2531/EN545
100503009.49.4ISO2531/EN545
100652008.98.9ISO2531/EN545
100802009.39.3ISO2531/EN545
1258020010.510.5ISO2531/EN545
12510020011.311.3ISO2531/EN545
1508040016.116.1ISO2531/EN545
1501003001515ISO2531/EN545
2008060026.926.7ISO2531/EN545
20010060027.227ISO2531/EN545
20015030021.721.5ISO2531/EN545
25015060038.438ISO2531/EN545
25020030030.129.5ISO2531/EN545
30010060039.839.4ISO2531/EN545
30015060046.446ISO2531/EN545
30020060051.651ISO2531/EN545
30025030040.339.5ISO2531/EN545
35020060057.760.5ISO2531/EN545
35025060064.467ISO2531/EN545
35030030049.452ISO2531/EN545
40030060078.984ISO2531/EN545
40035030058.567ISO2531/EN545
4504003006781ISO2531/EN545
8005001200420ISO2531/EN545


Send Message
  • * Must Be Filled

+86-532-88256388