Double Socket Tees With Flanged Branch

Ductile Iron Push-on Fitting EN545 ISO2531

Application: 

Municipal Use, Waterworks Pipelines, Piping Fittings, Water Engineering, Potable Water Use, Irrigation Use, Water Supply Project Use, Water Treatment Plants Use, Pumping Stations, Water Utility Sectors, Water-Supply Pressure Pipeline, Potable Water Pumping Station, Stormwater Lines, Fire Water Pumping Station, Fresh Water Pumping Station, ect.  


Introduction

DI Socket Fittings With Push-on On Joint(Tyton Joint)    




Specification: DN50-DN2000(2"-80"), available with PN10, PN16, PN25 and PN40 flanges    

Ductile Iron Flange Fittings Standard: ISO2531, ISO4179, ISO8179, BS EN 545, BS EN598, BS4772, ISO7005-2, EN1092-2:1997, DIN2501, GBT13295    

Flange: PN10, PN16 or PN25 drilling in accordance with ISO 7005-2/EN 1092-2.    

Fluid Temperature: 0°C-50°C, excluding frost.    

Pipe ends: Spigot, socket or flanges.    

Internal coating: Cement mortar lining comply with ISO4179 or bitumen painting (Ave. min.70 micron) or Fusion Bonded Epoxy Coating    

External coating: Sprayed metallic zinc coating (min.150g/m²) according to ISO8179 + bitumen painting (min.70 micron) or epoxy powder coating or epoxy painting or according to customer’s requirements.    

Types: Dismantling Joint, Universal Flange Adaptor, Universal Coupling, Ductile Iron Loose Flange Joint, DI Pipe Fitting, Saddle for PVC Pipe, Repair Clamp, Qucick Flange Adaptor, Gibault Joint, Restrained Flange Adaptor, Restrained Coupling, Valve, etc.    

Material: MATERIAL: Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 for ductile iron fitting body and retainer, EPDM/NBR for ring, steel zinced/dacro for stub.    

Application: 

Municipal Use, Waterworks Pipelines, Piping Fittings, Water Engineering, Potable Water Use, Irrigation Use, Water Supply Project Use, Water Treatment Plants Use, Pumping Stations, Water Utility Sectors, Water-Supply Pressure Pipeline, Potable Water Pumping Station, Stormwater Lines, Fire Water Pumping Station, Fresh Water Pumping Station, ect.    

Test: In accordance with ISO 2531 / EN 545 / EN598 and 100% water pressure test.    


Push on joint can assembled by pushing the spigot through the gasket in the socket of the mating component, and permits significant angular deflextion both during and after installation and which can accept a light offset of the centreline. As the Ductile Iron Push-on joint fitting manufacturer in China and Ductile Iron Push-on joint fitting factory, we hope working with you, we are eager to get your inquiries and establish long term mutual benefit cooperation relationship.    


Dimensions of Double Socket Tees With Flanged Branch    

DNdnLHMass (kg)
PN10PN16PN25PN40
804017016011.511.511.511.5
805015514512121212
806017016512.812.812.712.7
808017016513.513.513.513.5
1005017017514.614.614.614.6
1006017017515.215.215.115.1
1006516016515.215.215.115.1
1008017017515.815.815.815.8
10010019018017.217.217.717.7
1256017019515.915.915.815.8
1258017019019.419.419.419.4
12512522520023232425.5
1505016018020.420.4

1506516019022.722.722.622.6
1508017020523232323
15010019521024.524.52525
15012523021528282931.1
15015025522029.529.530.532.5
2008017523531.531.531.531.5
20010020024033.533.53434
20015025525039394042
20020031526045.64647.553
25010020027043.543.54444
25015025528059596062.1
25020031529057575964.5
25025037530065666979
3008018029554.554.554.554.5
300100205300555555.555.5
30015026031068.568.569.571.6
30020032032071707373
3508018532566.466.466.466.4
350100205330686868.568.5
400150270370102.5102.5103.5
400300440400129.5129.5134.5
450100215390999999.5
500100215420116116116
500150275430137137137
500250330440159.4159163173
500300455460171.4171176.6
500500680500232247259


Send Message
  • * Must Be Filled

+86-532-88256388