Flange Adaptor

Dismantling Joint And Flange Adaptor

Types: Dismantling Joint, Universal Flange Adaptor, Universal Coupling, Ductile Iron Loose Flange Joint, DI Pipe Fitting, Saddle for PVC Pipe, Repair Clamp, Qucick Flange Adaptor, Gibault Joint, Restrained Flange Adaptor, Restrained Coupling, Valve, etc.    

Material: MATERIAL: Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 for ductile iron fitting body and retainer, EPDM/NBR for ring, steel zinced/dacro for stub.  


Introduction

Specification: DN50-DN2000(2"-80"), available with PN10, PN16, PN25 and PN40 flanges    

Ductile Iron Flange Fittings Standard: ISO2531, ISO4179, ISO8179, BS EN 545, BS EN598, BS4772, ISO7005-2, EN1092-2:1997, DIN2501, GBT13295    

Flange: PN10, PN16 or PN25 drilling in accordance with ISO 7005-2/EN 1092-2.    

Fluid Temperature: 0°C-50°C, excluding frost.    

Pipe ends: Spigot, socket or flanges.    

Internal coating: Cement mortar lining comply with ISO4179 or bitumen painting (Ave. min.70 micron) or Fusion Bonded Epoxy Coating    

External coating: Sprayed metallic zinc coating (min.150g/m²) according to ISO8179 + bitumen painting (min.70 micron) or epoxy powder coating or epoxy painting or according to customer’s requirements.    

Types: Dismantling Joint, Universal Flange Adaptor, Universal Coupling, Ductile Iron Loose Flange Joint, DI Pipe Fitting, Saddle for PVC Pipe, Repair Clamp, Qucick Flange Adaptor, Gibault Joint, Restrained Flange Adaptor, Restrained Coupling, Valve, etc.    

Material: MATERIAL: Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 for ductile iron fitting body and retainer, EPDM/NBR for ring, steel zinced/dacro for stub.    

Application: Municipal Use, Waterworks Pipelines, Piping Fittings, Water Engineering, Potable Water Use, Irrigation Use, Water Supply Project Use, Water Treatment Plants Use, Pumping Stations, Water Utility Sectors, Water-Supply Pressure Pipeline, Potable Water Pumping Station, Stormwater Lines, Fire Water Pumping Station, Fresh Water Pumping Station, ect.    

Test: In accordance with ISO 2531 / EN 545 / EN598 and 100% water pressure test.    


Flange Adaptor    

The flange adapter is used where the two pieces of equipment do not have similar flange types or only one-half is flanged. These adapters fall into two broad categories, namely those used on dissimilar flange pairs and those used in situations where a non-flanged part is joined to a flanged part.As the Ductile Iron flange adaptor manufacturer in China and China Ductile Iron flange adaptor factory, we hope working with you, we are eager to get your inquiries and establish long term mutual benefit cooperation relationship.    


SizeSizeRangeWeight(kg)
401.5"48-583.2
502"59-723.6
652.5”72-854.5
803”88-1034.83
1004”108-1285.51
108-121


1255”132-1547.8
1506”159-1828.32
159-173


2007”192-20911.3
2008”218-2359.95
218-225


25010”271-28914.5
25010”252-27018.2
246-262


30012”322-34018.62
30012”315-33218.62
35014”374-39126
40016”417-43728.85
45018”480-50033.4
50020”526-54650
50020”495-51643.07
60024”630-65054.1
502"56-694.16
803"85-925
803"90-1085.12
1004"103-1176.14
1004"113-1306.05
1255"128-1477.37
1506"144-1628.8
2008"184-20811.69
2008"213-23012.16
2008"220-23811.94
25010"264-28816.92
30012"288-30620.49
30012"304-32119.61
30012"318-33619.4
35014"340-36027.62
35014"368-38623.7
40016"394-41429.18
45018"438-45835.15
45018"447-47534.18
45018"475-49832
55020"544-56440.23
60024"600-62055.77
60024"616-63954.34


Send Message
  • * Must Be Filled

+86-532-88256388